Gadgets
The best way to clean all the dirt and grime on your tech gadgets

We all know how important it is to keep our digital devices clean. After all, we use them every day to stay connected with the world. But sometimes it’s hard to know where to start when it comes to cleaning them. In this article, we will discuss some simple steps that everyone should know for cleaning smartphones and other digital devices.
1. Screen

One of the most important things to keep in mind when cleaning digital screens is to avoid using harsh chemicals. This includes things like window cleaner, alcohol, or even vinegar. These can damage the screen and cause permanent problems. Instead, use a mild soap and water solution or a commercial cleaning solution that is designed for use on digital screens. You almost certainly have a few smudged screens lying around. Use a microfiber cloth to clean your smartphone, tablet, e-reader, TV, or monitor. They’re gentle on your screens and won’t scratch them. Do not use rough paper towels.
A dry towel will readily wipe away most dirt and debris. Lightly dampen the cloth with distilled water to remove stubborn smudges and fingerprints. Never spray or pour water straight onto a screen, and avoid using glass cleaner as well. Many products contain ammonia, which can damage the surface of the screen.
For a more thorough clean, combine water and white vinegar or rubbing alcohol in a 1-to-1 ratio. You can also purchase a specialized electronics cleaner.
2. Keyboard

Another important area to focus on when cleaning digital devices is the keyboard. Again, avoid using harsh chemicals as they can damage the delicate keys. Instead, use a can of compressed air to blow away any dirt or dust that has accumulated. If there are stubborn stains, you can try using a cotton swab dipped in rubbing alcohol. Be sure to test this on an inconspicuous area first to make sure it won’t damage the finish.
Grime and loose dust particles penetrate far beyond the tops of the keys. A can of compressed air comes in help in this situation. Blow-Off, a compressed air duster for keyboards, is a good option. If you don’t have any, a piece of tape held tautly or the adhesive side of a Post-it note can work just as well.
Using a microfiber cloth or a disinfectant wipe, carefully wipe the tops of the keys and the palm rest. Wipes containing bleach or other harsh chemicals should be avoided since they can damage the keys. Wait until your keyboard is completely dry before plugging it in or turning it on. Once power is turned on, even a small amount of moisture can cause major problems and permanently damage electronic gadgets.
3. Mouse

If you’re cleaning a mouse, start by unplugging it from your computer. Then, use the cloth to wipe down the surface of the mouse, being careful not to get any moisture inside the device. Once you’ve cleaned the outside of the mouse, turn it over and gently shake it to remove any dirt or debris from the mouse’s internals.
For computers, it’s important to clean the mouse and keyboard on a regular basis. But you should also give your computer screen a good cleaning every now and then. Use the soft cloth to wipe down the surface of the screen, being careful not to press too hard or scratch the screen.
In general, it’s best to avoid using any kind of spray cleaner on your tech gadgets. If you must use a spray, be sure to apply it to the cloth first before wiping down the surface of the device.
4. Ports

Start by dusting off the surface of your device with the soft cloth. Pay special attention to ports and other openings, as these can easily accumulate dirt and grime. If you see any stubborn stains or buildup, take a cue from our port-cleaning tip below and use a cotton swab dipped in cleaning solution to gently remove it.
Once you’ve dusted and wiped down the surface of your device, it’s time to move on to ports and other openings. These can be tricky to clean because they’re often small and delicate. The best way to clean them is with a cotton swab dipped in cleaning solution. Gently insert the cotton swab into the port and twist it around to remove any dirt or grime.
With these simple tips, you can easily keep your tech gadgets clean and free of dirt, grime, and dust! ports and other openings are especially susceptible to buildup, so be sure to pay special attention to them when cleaning. By following these tips, you’ll help extend the life of your devices and keep them looking like new.
5. Printers

First, it’s important to understand what materials you should avoid using when cleaning your tech. For example, you should never use harsh chemicals or abrasive cleaners on any screen as this can damage the display. Instead, opt for a microfiber cloth or an alcohol-free wipes.
Next, let’s move on to cleaning the exterior of your tech devices. Start by using compressed air to remove any dust or dirt from the keyboard, ports, and other hard-to-reach areas. Once you’ve done that, you can use a damp cloth to wipe down the exterior of your device. Be sure to avoid getting any water on the screen!
Now let’s talk about cleaning the interior of your tech gadgets. This is where things can get a little tricky, but it’s important to do this occasionally to prevent buildup of dirt and grime. First, you’ll want to power down your device and remove any removable components, such as the battery or SIM card. Next, use a soft brush or canned air to clean out the dirt and debris from the interior of your device. Finally, use a clean, dry cloth to wipe down any remaining residue.
And there you have it! These simple steps will help you keep your tech gadgets clean and in good condition. So don’t wait any longer, get started today!
